Products > Motorized Mechanics > Studio Hoist

On this page: Combi Hoist_- Self Climbing Hoist

YL

The modular Stage Sets Combi Hoist pile winch application offers a wide range of design options for onstage electric hoists, front of house lighting hoists and scenery hoists. The drive unit and diverter pulley are mounted stationary to the ceiling. The moving section of the Combi Hoist is connector strip / lighting bar assembly. The complete system is under static and dynamic conditions self-sustaining, which makes susceptible mechanical braking systems mandatory and reduces the maintenance requirements to a minimum. The pile winch winding drums eliminate any risk of cross winding during operation.

 

 

Model Working load Weigh motor speed safety Light circuits Pipe length
YL- Combi Hoist 150 kg to 600 kg 230 kg 1.5, 3, 5 kw 0.2 m/s Slack  wire detection, Over load detection Up to 24 depending pipe length   5, 7, 9 m

 

 

 

 


SELF CLIMBING HOIST

The traveling connector strip is housing the gear motor and motor control system. The Lift Hoist is under static and dynamic conditions self-sustaining, which makes susceptible mechanical braking systems mandatory and reduces the maintenance requirements to a minimum. Each lift cable is furnished with an overload and slack wire detection. The pile winch winding drums eliminate any risk of cross winding during operation. The Lift Hoist comes completely pre-assembled and is easy to install.

 

Model

Working load

Weigh

motor

speed

safety

Light circuits

Pipe length

YL- self climbing Hoist

150 kg to

150 kg

1.5 kw

0.2 m/s

Slack  wire detection, Over load detection

Up to 12 depending pipe length  

3 to 5 m